Judit Molera: Research stay at the University of Delaware with Prof. Chandra Reedy
During July 2026, Dr Judit Molera, coordinator of the MECAMAT research group at the University of Vic – Central University … Read More
Montserrat Corbera at 2 Workshops on Celestial Mechanics, Mexico
During June 2026, Montserrat Corbera carried out a scientific stay in Mexico, actively participating in two international workshops focused on … Read More
Moisés Garín and Michelle Cedeño presents Novel Light-Direction Sensor Concept at EPSC-DPS 2025
Researchers Moisés Garín and Michelle Cedeño, participated in the EPSC-DPS Joint Meeting 2025, held from September 7 to 12 in … Read More
MECAMAT and UTRON AutoSport Join Forces for the 2025/26 Season
The MECAMAT research group at UVic-UCC has formalized a sponsorship agreement with UTRON AutoSport for the 2025/26 season. This collaboration … Read More
Our past through ceramics: what can glazes tell us?
Judit Molera,will explain why ceramics are one of the richest and most revealing material witnesses of our past. Drawing on … Read More
Nuri Cuadrado Joins UVic-UCC and the MECAMAT Research Group
Dr. Nuri Cuadrado Lafoz has joined the University of Vic – Central University of Catalonia (UVic-UCC) as a faculty member … Read More
Mecamat Researchers Participate in ALBA Synchrotron Project on Historical Lustres
Lisa Bruzzone and Judit Molera, members of the Mecamat research group, have recently participated in the project “Identification of nano … Read More
Installation of Crack-Movement Sensors at the Church of Sant Feliu de Barruera
The Mecamat research group, led by Professor Toni Suriñach, has recently installed crack-movement sensors on the apse and the bell … Read More
Montserrat Corbera at the Universidade de Lisboa
Montserrat Corbera has performed a stay in the research group CAMGSD at Instituto Superior Técnico of the Universidade de Lisboa from … Read More
New Publication Highlights Laboratory Methods for Archaeological Ceramic Analysis
A new scholarly publication authored by Irmgard Hein, Mustafa Kibaroğlu, Michaela Schauer, Anno Hein, Georgios Polymeris, Judit Molera, and Trinitat … Read More
Lisa Bruzzone and Judit Molera present groundbreaking Ceramic Research at EMAC 2025 in Bilbao
At the 17th European Meeting on Ancient Ceramics (EMAC 2025), held in Bilbao, Spain, researchers Lisa Bruzzone and Judit Molera … Read More
On July 31, 2025, Judit Molera Delivered a Lecture in the Master’s Course Material Science and Archaeological Ceramics: Ancient Pottery and its Pigments at the University of Tübingen
From July 28 to August 1, 2025, the University of Tübingen hosted the master’s course Material Science and Archaeological Ceramics: … Read More
Ani Martirosyan Defends Doctoral Thesis on How Deciduous Tooth Enamel Preserves Early Life Events and Infant Mortality Patterns in Ancient Populations
On 16.07.2025, Ani Martyrosian Defends Doctoral Thesis at UAB: Enamel growth lines in deciduous teeth: Life history reconstruction in ancient populations, … Read More
Josep Maria Carbonell Puigbo visited the Institute of Forming Technology and Lightweight Components (IUL), Dortmund, Germany.
On June 25, Prof. Josep Maria Carbonell Puigbo visited the Institute of Forming Technology and Lightweight Components (IUL) as part … Read More
Judit Molera conducts XRD experiment at ALBA Synchrotron
From May 9th to 11th, Dr. Judit Molera carried out a synchrotron experiment at the ALBA Synchrotron, located in Cerdanyola … Read More
Tom Garnaud joins MECAMAT Group to enhance Data Acquisition System
The MECAMAT research group at the University of Vic – Central University of Catalonia (UVic-UCC) is pleased to welcome Tom … Read More
PhD Student Lisa Bruzzone begins 6 month research stay at Mecamat Group
The Mecamat research group at the University of Vic – Central University of Catalonia (UVic-UCC) has recently welcomed PhD student … Read More
Predoctoral Grants
We inform you that Grants for the recruitment of predoctoral research staff in training within the fields of STEP technologies … Read More
Josep Maria Carbonell Publishes Groundbreaking Model for Ultrasonic-Assisted Machining of Ti6Al4V Alloy
The article “A microstructure-integrated acoustoplastic constitutive model for ultrasonic-assisted machining of Ti6Al4V alloy” presents a novel modeling approach combining the … Read More
Moisés Garín Presented ESA Project at AI Horizons Event
Moisés Garín briefly presented his groundbreaking project on revolutionary sun sensor technology for satellite orientation during the “AI Horizons: Shaping … Read More
New Study Reveals the sequence of Iron-Manganese Crystalline Phases in High Lead Glazes
This study led by researchers from the MECAMAT Research Group at the Universitat de Vic – Universitat Central de Catalunya, … Read More
Moisés Garín leads groundbreaking Sun Sensor Research with Sandra Bermejo on board
A major step forward in satellite navigation and space instrumentation has begun with the launch of an ambitious research project … Read More
Exploring Advanced Oscillator Dynamics: Research by Claudia Valls and Montserrat Corbera
Claudia Valls Angles, PhD, Professor at Instituto Superior Tecnico of Universidade de Lisboa, Portugal, has just performed a research visit … Read More
Hadi Bakhshan Successfully Defends His Doctoral Thesis on Advanced Numerical Modeling Techniques
On Friday, December 20, 2024, Hadi Bakhshan, a promising doctoral candidate, successfully defended his thesis titled “Numerical Modeling of Manufacturing … Read More
Scientific Collaboration Between UVic-UCC and the University of Florence on Medieval Ceramics
Rosarosa Manca, a researcher from the Department of Earth Sciences at the University of Florence, was recently invited by Dr. … Read More
Five Years of Crack Monitoring at Santes Creus: Insights from an Open-Source DAS Presented at XV Congreso Iberico de Arqueometri
We presented at the XV Congreso Ibérico de Arquemotreia in Aveiro from October 21-24, 2024, the results of monitoring for … Read More
Garrins Metàl·lics Robotics Team constitution for the 2024/25 Season
The UVic-UCC Garrins Metàl·lics robotics team has been reconstituted to face the 2024/25 season. Paola Viedma, Narcís Gonzàlez, Jordi Sánchez … Read More
Study Reveals High Infant Mortality in Iberian Iron Age Using Innovative Tooth Analysis Techniques
The study was led by researchers from the GREAB (UAB) in collaboration with the MECAMAT Research Group at the University … Read More
Diletta Paghi’s Erasmus+ Traineeship: Archaeometric Analysis of Tin-Glazed Ceramics from Spain and Italy (10th-16th Century)
Diletta Paghi has begun her Erasmus+ traineeship on October 1st, which will run until December 31st. During this period, she … Read More
Successful Experiment at Beamline ID21, ESRF: Copper Speciation in Lustre Layers
As part of Ruth Sadurní’s PhD research, a highly successful experiment was conducted at the European Synchrotron Radiation Facility (ESRF) … Read More
René Meziat will present a seminar on variational principles and finite element method (FEM)
On October 1st, the Faculty of Science, Technology, and Engineering (FCTE) will have the honor of hosting René Meziat. Dr. … Read More
Josep M. Carbonell at 43rd Solid Mechanics Conference
Josep M. Carbonell will be presenting a paper titled “Numerical Modelling of Machining and Finishing Operations Using the PFEM” at … Read More
Research contract on the development of Interferential light-direction sensor
This research is funded by ESA’s Discovery Programme, via the EISI implementation mechanism, and is developed by a consortium formed … Read More
Call for UVic-UCC Predoctoral Grants for the 2024/25 academic year
Today opens the deadline of the call for UVic-UCC Predoctoral Grants for the 2024/25 academic year. The aim is to … Read More
Pre-doctoral Grant FI-SDUR. Call Now Open!
We inform you that the call FI-SDUR 2024 Grants for university departments and research units aimed at the recruitment of … Read More
“Engineering and Science for a Sustainable World”
On the 9th of May 2024, the Faculty of Science, Technology, and Engineering at the University of Vic – Central … Read More
Judit Molera imparted an online conference for a Master students of Tübingen University
Judit Molera delivered a conference on “Synchrotron X-ray Diffraction (DRX) to Study Ceramic Glaze Pigments” as part of the Material … Read More
UVic-UCC Garrins Metàl·lics Robotics Team Competes in Eurobot Spain 2024
The UVic-UCC Garrins Metàl·lics robotics team is traveling to Alcalá de Henares this week to participate in the Eurobot Spain … Read More
Mecamat Research Group Implements Fissurometers at Cardona Castle Church
Mecamat research group has successfully installed fissurometers to track the movement of cracks within Cardona Castle Church. Engineered by Mecamat, … Read More
Dr. Claudia Valls has done a research stay at MECAMAT
Claudia Valls Angles, Professor of Instituto Superior Tecnico ofUniversidade de Lisboa, Portugal, has done a research stay at MECAMATfrom February … Read More
New robotics team Garrins Metàl·lics for the 2023/24 season
The Garrins Metàl·lics robotics team of UVic-UCC has been reconstituted to face the 2023/24 season. Compared to the previous season, … Read More
International Day of World Heritage, the ‘Applied Sciences to the Study of al-Andalus’ in Alhambra of Granada
On the occasion of the International Day of World Heritage, the ‘Applied Sciences to the Study of al-Andalus’ conference was … Read More
Josep Maria Carbonell published: Deep Neural Networks for the Estimation ofMasonry Structures Failures under Rockfalls, Geosciences
In this study, a numerical methodology has been developed to assess the expected damage of masonry walls when impacted by … Read More
ALBA experiment at XALOC beam line to determine the neonatal line in primary teeth of the Iron Age Iberians with Judit Juanhuix ALBA staff
Any Martirosyan (doctorand (UAB)), Judit Molera (IP of the experiment and co-director UVIC-UCC), Xavier Jornada (co director UAB), Assumpció Malgosa … Read More
The world of glass and glazing. Event of the International Year of Glass 2022 at Institut d’Estudis Catalans
On Tuesday 29 November 2022, the Catalan Society of Chemistry and Mecamat group of UVIC-UCC organized the event “The world … Read More
Mecamat is monitorising the movements of the Poblet Monestry Church.
On Tuesday, November 15, the Mecamat Group installed Distance Meters, Inclinometers and Crack meters in the central nave of the … Read More
Josep Maria Carbonell at the Department of Mechanical and Aerospace Engineering (A&M)* of the University of Liège.
From 29.08.2022 to 23.12.2022 Dr. Josep Maria Carbonell has been doing a research visiting stage at Department of Mechanical and … Read More
The MECAMAT research group participated with two works in the 14th Iberian Congress of Archaeometry
The MECAMAT research group participated with two works in the 14th Iberian Congress of Archaeometry organized by the Sociedad de … Read More
Montserrat Corbera at the Universidade de Lisboa
Montserrat Corbera has done a research stay at the Center for Mathematical Analysis, Geometry and Dynamical Systems, at Intituto Superior Técnico of the Universidade de Lisboa from October … Read More
Lisa Bruzzone, student at the University of Genoa, as an Erasmus + trainee in MECAMAT
From 19 September to 29 November, Lisa Bruzzone is doing an Erasmus + trainee in MECAMAT group with the supervision … Read More
Judit Molera at DISTAV (University of Genoa)
From 17 October to 1st November 2022, Judit Molera did a research stay in the University of Genoa at DISTAV … Read More
Going deeper into modern and fossil crocodilian tooth microanatomy: what can be inferred of palaeoenvironment and taphonomy from histochemical analyses?
Teeth provide information about the evolutionary pathway of an organism, its biology and habitat. This is the case even of … Read More
Moises Garin published: “Multilayer porous silicon spherical Mie resonator photodiodes with comb-like spectral response in the near infrared region”
Silicon microsphere photodiodes constitute optoelectronic devices able to provide resonance-enhanced photocurrent not only in the visible but also in the near infrared range by virtue of their … Read More
Julio Martí, on charge of the edition of an special issue of Journal of Marine Science and Engineering about coupled CFD problems.
The Special Issue, which is now open for submissions, welcomes works reporting advances in the development of numerical methods for coupled … Read More
Meeting of glaze specialists at UVIC-UCC
On July 12, 2022 we held a meeting on glass with the participation of artists and scientists;Toni Cumella, Pep Madrenas, … Read More
Moises Garin is doing a Research Stay in the Electron Physics group at AALTO University (Finland)
Moises Garin is doing a research stay in the Electron Physics group led by Dr. Hele Savin, in the Department … Read More
Judit Molera published “Manganese crystalline phases developed in high lead glazes during firing” in Journal European Ceramic Society (Open Acess)
Manganese oxides were used since antiquity as glaze ceramic brown/black pigments. In most of the cases, manganese oxide dissolves into … Read More
Joan Nicolás-Apruzzese published “A Survey on Capacitor Voltage Control in Neutral-Point-Clamped Multilevel Converters”
Neutral-point-clamped multilevel converters are currently a suitable solution for a wide range of applications. It is well known that the … Read More
Synchrotron study of the alteration of glass windows exposed to marine aerosols
Judit Molera participate in the ALBA Synchrotron Project to analyze the crystalline phases developed in stained-glass windows exposed to marine … Read More
Moises Garín has created a flexible and open source device to measure CO2 levels
The project involves regularly measuring and making accessible to the community various indicators, such as relative humidity, ambient temperature and … Read More
Monitoring organic chicken farm Niu Verd.
Juli Ordeix, Jordi Serra and David Reifs have created the system for monitoring water level in the tanks, the level … Read More
Josep M. Carbonell published “Large-strain analysis of undrained smooth tube sampling”.
The paper presents numerical analyses of smooth tube sampling in clay using the particle finite-element method. Borehole tube sampling is … Read More
Electric vehicle (EV): 150 years of history by Moises Garín (el Punt Avui newspaper)
When we talk about electric vehicle, is very common that we do it by associating its concept in the “automotive … Read More
Montserrat Corbera and Claudia Valls completely characterize the global phase portraits in the Poincaré disk for all planar Hamiltonian vector fields with linear plus cubic homogeneous terms having a nilpotent saddle at the origin.
Montserrat Corbera and Claudia Valls completely characterize the global phase portraits in the Poincaré disk for all planar Hamiltonian vector … Read More
La FIRST LEGO League de la UVic celebra el seu 10è aniversari
La FIRST LEGO League de la UVic celebra el seu 10è aniversari amb 500 nois i noies participants, … Read More
Montserrat Corbera at the conference “XIX Jornadas de Trabajo en Mecánica Celeste”
Montserrat Corbera has presented the oral communication “A special family of symmetric central configurations of the planar 3n-body problem” at … Read More
Garrins Metàl·lics won the Eurobot-Spain contest 2021 in Alcalá de Henares. Congratulations!!
This year, the team is formed by the students of Mechatronics Engineering: Edgar Gallipoli, Ibrahim Amar Touhami, Sergi de las … Read More
WAITINGFOREMAC2023@Pisa online event invited Judit Molera as keynote speaker on 6th July 2021
Judit Molera has been invited as keynote speaker in the frame of the online event WAITINGFOREMAC2023@Pisa which will take place … Read More
Montserrat Corbera is a coorganizer the “V Encuentro Conjunto de la Real Sociedad Matemática Española (RSME) y la Sociedad Matemática Mexicana (SMM)” held on 14-18th June in Guanajuato, Mexico.
Montserrat Corbera is a coorganizer of the special session “Mecánica Celeste y Sistemas Hamiltonianos” in the “V Encuentro Conjunto de la Real Sociedad … Read More
“Ceramic technology. How to characterise ceramic glazes” is now free for download
T. Pradell and J. Molera’s paper in the Topical Issue (TI) “Ceramics: Research questions and answers” aimed at guiding researchers … Read More
The team Utron Racing coordinated by Moises Garin has finished the electric vehicle chassis to take part in the next edition of the Formula Student Spain
Utron Racing team from UVIC has finished the electric vehicle chassis to take part in the next edition of the … Read More
Olimpíades de Geologia 2021
Judit Molera has been interviewed in the Conference “Searching Geologists” performed by Ingrit Soriguera and Jordi Vila in “Olimpíades de Geologia … Read More
Collaborative Robotics Seminar
On February 3, 2021 the Science and Technology Faculty of UVIC-UCC organized a practical seminar on Collaborative Robotics taught by … Read More
Ramon Jerez at the POPAP Program on Catalunya Radio talking about “3D Printing. Reprinting reality”
Professor Ramón Jerez, from the Department of Engineering and member of the MECAMAT research group, took part as a guest … Read More
Jaime Aparicio presented his TFG based on the development of a data acquisition system for the monitoring of structural and environmental parameters in historical buildings.
Student Jaime Aparicio presented his Final Year Project for the obtention of the Degree in Industrial Electronics, Engineering and Automation … Read More
Experimental study of historical processing of cobalt arsenide ore for colouring glazes (15-16th century Europe)
Judit Molera has published a new experimental work with data obtained on HT-XRD Synchrotron (ALBA MSPD BeamLine). Cobalt was used since … Read More
Ramón Jerez-Mesa published a new paper exploring the effects of severe plastic deformation on surfaces of metastable austenitic AISI 301LN Steel
The investigator Ramón Jerez-Mesa of the MECAMAT research group, explores in his last paper the effects of severe plastic deformation … Read More
Judit Molera, member of the PhD Thesis Committee of Marti Beltran Thesis entitled “Analysis and degradation mechanisms of enamels, grisailles and silver stains on modernist stained glass”
Miguel Angel García Aranda, Marcia Vilarigues and Judit Molera have been invited as PhD Thesis Committee of Martí Beltran Thesis … Read More
Open FPI pre-doc contract to study “The crystal growth in glazes as a fingerprint of past technology”
Aid for pre-doc contracts for the training of doctors contemplated in the State Training Subprogram, of the State Program for … Read More
Moises Garin in collaboration with Aalto University researchers have developed a black silicon photodetector that has reached efficiency above 130% in UV range without external amplification.
As the work shows, the device breaks the one photon — one electron barrier thanks to the efficient utilization of … Read More
The MECAMAT Tensile Testing Machine has been brought to a new, open source life.
Jordi Serra Espaulella focused its efforts in modify the machine hardware and software originally created by the student Marcel Pla … Read More
Josep Ayats: ‘With the adaptation with so little time of the programming of the Summer University to the virtual format we have achieved the first big goal’
Josep Ayats és llicenciat en Ciències Físiques per la Universitat de Barcelona (UB) i diploma d’Estudis Avançats en Meteorologia i … Read More
UVIC-UCC organized FIRST Tech Challenge (FTC), FIRST LEGO League (FLL) and FIRST LEGO League Junior (FLL Jr)
Josep Ayats, Juli Ordeix and Ramon Jerez organized FLL, FCT and FLL Jr attracting 700 participants and about 2000 people, … Read More
Crackmeters have been designed and installed in the Royal Monastery of Santes Creus
Last November 2019, a set of 6 crackmeters have been installed in the Royal Monastery of Santes Creus, a former … Read More
Study of glass-metal soldering with lead-free alloys in collaboration with Bellapart Group
Judit Molera realized a Research stage at Bellapart Company, since 1st Novembre to 5th December 2019, to study the microstructure … Read More
Differences in teeth and bones of existing and extinct crocodiles. Collaborative Research UVIC-UCC, UAM, UAH, UB, ICV-CSIC at ALBA Synchrotron
Crocodile bones and teeth, from the existing Nile specie and also from fossils dated 70 million years ago, have been … Read More
Mainardo Gaudenzi was at ERSCP2019 to talk about OpenScience and OpenHardware to enhance Sustainability and Inclusiveness in Research.
Mainardo Gaudenzi presented “The Open Source Hardware paradigm: an emerging model for research?” The open source approach to hardware design, … Read More
A new Garrins Metallic Robotics Team for 2019-2020 season
In this edition, the team will be composed of 6 students of Mechatronics and Biomedical Engineering of the Faculty of … Read More
Roberta Di Febo present her PhD on 21th October 2019 at UVIC-UCC
This research develops a methodological approach to the study of ceramic glaze microstructures based on thin-section petrographic methods. Starting from … Read More
Montse Corbera has published a new paper on convex but non-strictly convex central configurations of the spatial (2n+2)-body problem
Montserrat Corbera and Jaume Llibre have published a new paper proving the existence of a new family of central configurations in … Read More
Dr. Claudia Valls from Instituto Superior Tecnico of Universidade de Lisboa has done a research stay at MECAMAT
Claudia Valls Angles, PhD, Professor of Instituto Superior Tecnico of Universidade de Lisboa, Portugal, has done a research stay at … Read More
Miquel Caballeria at the Kick-off Meeting of the MICINN/FEDER project Mediterranean sheltered beach morphodynamics in the face of climate change
The kick-off meeting of the Mediterranean sheltered beach morphodynamics in the face of climate change, MICINN/FEDER project, will be held … Read More
Mecamat at 15th EMAC, 16-18th September 2019
The European Meeting on Ancient Ceramics (EMAC) is a biennial conference convening scholars and young researchers with diverse academic backgrounds … Read More
Mecamat developed an RTI device for MNAC (Museu Nacional d’Art de Catalunya)
On Monday the 15th of July, the researchers from MECAMAT Mainardo Gaudenzi, Judit Molera and their Traineeship student Jaime Aparicio, … Read More
Jaime Aparicio, Brandon Aranibar and Adrian Montealegre are carrying out a Summer Traineeship at MECAMAT Research Group
Vic, summer 2019. Two students of Mechatronics Engineering and one student of Biology from UVIC-UCC have been doing Summer Traineeship … Read More
Judit Molera and Researchers from UAM and CSIC-Instituto de Cerámica y Vidrio have led a collaborative research at ALBA Synchrotron
From 16 to 18 June 2019, the researchers Judit Molera from MECAMAT, Oscar Cambra and Julia Audije from Universidad Autonoma de … Read More
Pau Català participates as a speaker at the “XVII Reunión de Profesores de Ingeniería Mecánica y de Vehículos / II Encuentro de Jóvenes Investigadores de Ingeniería Mecánica”
Assistant Professor Dr Pau Català from UVic-UCC MECAMAT research group has participated as speaker in the “XVII Reunión de Profesores … Read More
From June 14-17h members of Mecamat Group have led a micro-XRD experiment at ALBA Synchrotron.
The objective is to determine the crystalline phases developed in ancient Lead frits and replicas. Small beam size is required as typical … Read More
Students from EASD Vic have come to our Lab to study their tempered steels
Last April, students from UVIC-UCC went to EASD to see and learn how to temper and forge steels. Now, the … Read More
Josep Ayats and Juli Ordeix have organized the robotics competition FIRST Tech Challenge (FTC), 5th&6th April 2019 in the American School of Barcelona
The Scientia Foundation and the UVic-UCC, sponsored by Girbau Group company, have organized the robotics competition FIRST Tech Challenge (FTC) held on 5th&6th … Read More
Dr. Gaudenzi Asinelli will benefit from a 2 years fellowship within the TECNIOspring Plus programme in collaboration with BETA Technological Centre
The MECAMAT member Mainardo Gaudenzi Asinelli will benefit from a 2 years Marie Sklodowska-Curie COFUND fellowship within the TECNIOspring Plus … Read More
Montse Corbera has published a new paper on the classification of Trapezoid Central Configurations
Montserrat Corbera and co-authors have published a new paper to classify all planar four–body central configurations where two pairs of … Read More
HERITAGE, SCIENCES AND TECHNOLOGIES: AN OPPORTUNITY FOR OUR SOCIETIES AND THE GLOBAL ECONOMY Paris Declaration, 15 February 2019
HERITAGE, SCIENCES AND TECHNOLOGIES (Organisé par : BERTRAND Loïc) … Read More
Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication
Additive manufacturing, as a general concept referring to technologies that allow the user to manufacture in situ desired geometries based … Read More
Josep Ayats and Juli Ordeix coordinate the First Tech Challenge Robotics Competition at a National Level
The Scientia Foundation and the UVic-UCC, sponsored by Girbau Group company, have agreed to organize the robotics competition FIRST Tech Challenge (FTC) at the national level … Read More
Dr. Ramón Jerez attended the 3rd and 4th of December to working sessions in the aeronautical pole of Toulouse
Metallicadour is technological center, installed in Assat near Safran, and other companies that manufacture components for Airbus. The session had the aim … Read More
Dr. Ramón Jerez, member of the scientific committee of the 19th European Roundtable on Sustainable Consumption and Production (ERSCP 2019)
19th European Roundtable on Sustainable Consumption and Production – Circular Europe for Sustainability: Design, Production and Consumption (ERSCP 2019) will take … Read More
The prototype of a robotic hand by Javier Chacón receives the Eusebi Molera Prize 2018, for the best UVC-UCC Engineering Degree Final Project
As part of his Degree Final Project (DFP), carried out within the MECAMAT research group at UVic/UCC, Javier Chacón developed … Read More
Judit Molera participated in the micro-DRX Experiment at ALBA Synchrotron “The carbonation process in transferred Romanesque mural paintings”
The reaction between Ca(OH)2 and atmospheric CO2 in an aqueous system gives rise to the formation of calcium carbonate. However, … Read More
Miquel Caballeria participated in the new series of reports “Sustainable Universe” program on “La 2 de TVE”
Miquel Caballeria, Ph.D. in Physical Sciences and professor at the Faculty of Sciences and Technology of the University of Vic, … Read More
Montserrat Corbera at the conference “HAMSYS2018”
Montserrat Corbera has presented the oral communication “ The set of convex central configurations of the 4-body problem” at the conference “HAMSYS2018” … Read More
Judit Molera was invited to present her work about Lead Glazes as a Keynote Speaker at the to LVI Congreso Nacional de Cerámica y Vidrio, Barcelona October 2018
Technological tracers in glazed and decorated ceramics. Lead glazes and Tin glazes were widely used in the Iberian Peninsula from … Read More
EAA Barcelona2018-GLAZE PRODUCTION TECHNOLOGY IN THE MEDIEVAL AND POST-MEDIEVAL MEDITERRANEAN
7 September 2018 Mainardo Gaudenzi and Judit Molera co-organised a very sucessful session about Glazes in #EAA2018 GLAZE PRODUCTION TECHNOLOGY … Read More
A successful crowdfunding campaign will allow MECAMAT rescue and valorise Catalan cultural heritage
A project implemented by Mainardo Gaudenzi, researcher of the MECAMAT research group collected a total of 14,267 € within the … Read More
Sustainable technology in research: utopia or emerging model?
UST-SEMINARS 23.05.2018. Ts116 15h-16.30h By Mainardo Gaudenzi Asinelli, PhD ABSTRACT: Current global market monolithic rules such as proprietary licenses and patents … Read More
Mainardo Gaudenzi gave a talk about Technology for Art at ESDAP
Art and technology have a common mission, shape and innovate the world around us. Moreover, they share a common and … Read More
The phd student Gerard Masferrer and Moisès Serra have published one paper in Meat Science.
The phd student Gerard Masferrer, member of the mecamat group research, has published the paper On-line Ham Grading using pattern recognition … Read More
UVic-UCC engineering students visit Vic School of Superior Art Design
Students from different engineering degrees of UVic-UCC visited Vic School of Superior Art Design (EASDV) for learning the relation between … Read More
Dr. Claudia Valls from Instituto Superior Tecnico of Universidade de Lisboa is doing a research stay at MECAMAT
Claudia Valls Angles, PhD, Professor of Instituto Superior Tecnico of Universidade de Lisboa, Portugal, is doing a research stay at … Read More
International Workshop “Glaze technology in the Western Mediterranean: Islamic and Christian traditions”. Valencia, 25 January 2018.
International Workshop Glaze Technology in the Western Mediterranean: Islamic and Christian traditions January 25th 2018 MUSEO NACIONAL DE CERÁMICA Y ARTES SUNTUARIAS GONZÁLEZ MARTÍ” … Read More
Pau Català attended at International Days 2017 organized by Nürtingen-Geislingen University of Applied Science (HFWU)
Assistant Professor Pau Català has done an Erasmus+ Training stage at the Nürtingen-Geislingen University of Applied Science (HFWU) in Germany … Read More
Roberta Di Febo and Judit Molera have published a new article in Journal of the American Ceramic Society.
The production of a lead glaze with galena: Thermal transformations in the PbS–SiO2 system Roberta Di Febo, Judit Molera, Trinitat Pradell, Joan C. Melgarejo, Josep … Read More
Marcel Pla has been the winner of the UVic-CETIM awards for the best Final Degree Projects (TFG)
Marcel Pla has been the winner of the UVic-CETIM awards Eusebi Molera for the best Final Degree Projects (TFG) in the … Read More
Students
MECAMAT Research focuses on different aspects of Mechatronics, Modelling and Materials, The main research topics of the group are: Design, manufacture and … Read More
smARTS project at the 12th Iberian Congress of Archaeometry
smARTS theoretical framework and devices prototyped within the MECAMAT research group have been presented at the XII Congreso Ibérico de … Read More
MECAMAT and its smARTS project become Associated Partner of the CHeLabS initiative
The MECAMAT research group has become Associated Partner of CHeLabS – Cultural Heritage Laboratory System, an international initiative led by … Read More
Mecamat and Make &Learn at EASD of Vic
Members of Mecamat Research Group and Make&Learn have visited Escola d’ART i Superior de Disseny de Vic (EASD) to cast … Read More
Mechatronics students prepares a car Gearbox donated by taller Autoscratch to be used for practical lessons
Albert Cantó and Sergi Vilaseca are two students of the Bachelor Degree in Mechatronics Engineering who are very interested in … Read More
Moisès Serra Serra at the Pontifical Catholic University of Paraná (Curitiba, Brazil)
Moisès Serra has been done a research stay at the Polytechnic School of Pontifical Catholic University of Paraná from Juny 24 … Read More
Marcel Pla defends his TFG ” Construction of a universal machine to measure the biomechanical properties of arteries and polymers”
On june 20th, Marcel Pla Prat, obtained the double degree in Mechatronics Engineering and Industrial Electronics Engineering and Automatization at UVic-UCC after … Read More
Roberta Di Febo and Judit Molera have published a new article
Roberta Di Febo and Judit Molera have published an article in the European Journal of Mineralogy about Mn and Fe-rich crystals phases … Read More
Montserrat Corbera at the conference “XVI Jornadas de Trabajo en Mecánica Celeste”
Montserrat Corbera has presented the oral communication “Othodiagonal quadrilateral central configurations” at the Conference “XVI Jornadas de Trabajo en Mecánica Celeste” held … Read More
Mechatronics meets Heritage Conservation Science
The workshop Mechatronics meets Heritage Conservation Science, 27th June 2017 at UVIC-UCC during International Workshop on Higher Education, was really interesting, with … Read More
IWHE’17 Mechatronics meets Heritage Conservation Science
The International Workshop on Higher Education returns to UVic-UCC over the period 26 – 30 June 2017. This is an … Read More
UVic-UCC predoctoral research fellowships
We are pleased to inform you that the call for UVic-UCC predoctoral research fellowships applications 2017/18 is now open. This … Read More
Montserrat Corbera at the Universidade the Lisboa
Montserrat Corbera has been done a research stay at the Centre for Mathematical Analysis, Geometry, and Dynamical Systems CAMGSD of … Read More
Follow smARTS on new Mecamat Twitter account
smARTS project actions and development can be now followed on the new Mecamat research group Twitter account @UMecamat. First smARTS … Read More
Mecamat ready to share tweets!
The Mecamat research group opened its Twitter account @UMecamat. First tweets released in occasion of the participation of the research … Read More
smARTS project participated at EspaiCiencia in Saló de l’Ensenyament in Barcelona
The Saló de l’Ensenyament is the key annual event for students looking for careers guidance. The aim of the “Espai … Read More
Marcel Pla, student of Mechatronics Engineering in UVIC-UCC, is constructing an Universal Testing Machine
This universal testing machine has been designed to test the tensile strength of arteries and veins. Professors Pau Català, Judit Molera … Read More
5th First Lego League Competition at UVIC-UCC, 18th February 2017
FIRST® LEGO® League (FLL®) is a Global Science and Technology Competition with over 250.000 young people taking part each year. … Read More
First tests on ESP8266 modules for cultural heritage monitoring
At smARTS we are now testing ESP8266-derived modules as microcontrollers to be used for monitoring environments parameters such as temperature … Read More
smARTS project launches its visual identity
smARTS project enhances its visibility by creating a project logo that includes the acronym and extended title of the project, … Read More
Gelosia-Llibreta finalist at @EartVic Prizes
Dia 14 a les 13.00: presentació a … Read More
smARTS presented at the “Cultural Heritage, disaster resilience and climate change” event
smARTS project (EU-Horizon 2020 research and innovations programme under the Marie Sklodowska-Curie grant agreement Nº 708527) has been selected for … Read More
MECAMAT at the PAL Robotics Open Day
Members of the MECAMAT research group, along with students of the UVic-UCC Master in Robotics, attended at the Open Day organized … Read More
Pau Català Calderón joined MECAMAT
MECAMAT group has a new member, Pau Català Calderón, PhD. He joined UVIC-UCC after gaining a position in the framework of … Read More
Dr. Claudia Valls from Instituto Superior Tecnico of Universidade de Lisboa is doing a research stay at MECAMAT
Claudia Valls Angles, PhD, Professor of Instituto Superior Tecnico of Universidade de Lisboa, Portugal, is doing a research stay at … Read More
Roberta Di Febo and Judit Molera research at LV Congreso Nacional de la SECV
Judit Molera has attended 5-7th October at the LV Congreso Nacional de Cerámica y Vidrio. During this congress, which has been … Read More
Research at the Faculty of Sciences: our PhD students
“més ciutat, més cultura, més ceràmica”
Judit Molera has participated in the Exhibition “més ciutat, més cultura, més ceràmica” presenting the work “Glazes under microscopy”
Mainardo Gaudenzi Asinelli has been incorporated to MECAMAT Group
The research group on Mechatronics and Modelling applied to Technology of Materials (MECAMAT) launches the project SmARTs, acronym for ‘Smart … Read More
6è International Workshop on Higher Education (IWHE)
Workshop: Ceramic Glazes Studies Meeting Date – Thursday, 16 th June. Morning and afternoon from 9:00 to 18:00 h Place – Room … Read More
Mecamat Group win the 8th edition of I+T DE CERÀMICA I TERRISSA “MEMORIAL JOAN CAPDEVILA” .
Architect Albert Colomer and Judit Molera (Coordinator of Mecamat Group) win the 8th edition of I+T DE CERÀMICA I TERRISSA … Read More